Contacteur,disjoncteur,onduleur solaire,compteur électrique,batteries solaires
Eaton Moeller M22-LEDC-IEC-EN60947-5-1 LED Indicator Light
Eaton Moeller® RMQ-Titan series M22-size LED indicator element, complying with IEC/EN 60947-5-1 standard for control circuit electrical appliances. It adopts base mounting and screw terminal connection, fits 22.5mm panel cutout, and is applicable for signal indication on industrial control panels.
- Model Segment Definition
| Segment | Signification | Description |
| M22 | Série de produits | Eaton Moeller RMQ-Titan series, suitable for standard 22.5mm panel cutout |
| LEDC | Type de produit | LED indicator element; C stands for Base Fixing, differentiated from front mounting (DIRIGÉ) and cage clamp terminal (CLED) |
| IEC-EN60947-5-1 | Executive Standard | Complies with IEC and European EN standards for control circuit equipment; applicable to electromechanical control circuits for control, signaling and interlock functions. Max rated voltage: 1000V et / 600À DC |
| [Color Suffix] | Indicator Color | R.(Rouge), G(Vert), B(Bleu), W(Blanc), etc.. |
| [Voltage Suffix] | Tension nominale | No suffix = 12–30V AC/DC; 230 = 85–264V AC |
- Spécifications de base
| Catégorie de paramètre | Données techniques | Remarques |
| General Characteristics | ||
| Type de produit | LED Indicator Element | Base mounting, screw terminal connection |
| Marque | Eaton Moeller® | RMQ-Titan Series |
| Type de montage | Base Fixing | Differentiated from Front Fixing |
| Type de connexion | Screw Terminals | Alternative available: CLED series with cage clamp terminals |
| Panel Cutout | Standard 22.5mm | Compliant with M22 series standard |
| Electrical Ratings | ||
| Tension de fonctionnement nominale (Ue) | 12–30V AC/DC (pas de suffixe); 85–264V AC (230 suffixe) | 50/60Hz compatible |
| Courant de fonctionnement nominal (C'est à dire) | 8–15mA | Slight variation by model |
| Tension d'isolation nominale (Interface utilisateur) | 250V | Meets Overvoltage Category III requirements |
| Consommation d'énergie | Environ. 0.3W | Low-power LED design |
| Protection contre la pénétration | IP66/IP69K | Convient aux environnements industriels difficiles |
| Physical Dimensions | ||
| Dimension (L×L×H) | 38mm×37mm×10mm | Structure compacte |
| Poids | Environ. 0.011kilos | Lightweight installation |
| Color Options | Rouge(R.), Vert(G), Bleu(B), Blanc(W) | Covers various signal indication demands |
| Conditions environnementales | ||
| Température de fonctionnement | -30°C ~ +70°C | Wide temperature range |
| Température de stockage | -40°C ~ +70°C | Adapt to severe storage conditions |
| Vibration / Résistance aux chocs | Conforme à la CEI 60068 | Industrial reliability |
| Certifications & Normes | ||
| Main Standards | CEI/EN 60947-5-1, UL 508, CSA C22.2 No.94-91 | Global multi-standard approval |
| Marques de certification | CE, UL, ASC | Compliant with international safety norms |
- Liste des accessoires & Mounting Parts
| Numéro de pièce. | Nom | Fonction | Application |
| M22-CK10 | LED Mounting Bracket | Provides contact and mounting support for LED indicator | Control panel installation, improved stability |
| M22-K01 | Mounting Fitting | Ensures reliable installation of LED indicators | General industrial & commercial use |
| M22-A | Adapter | Adapts to special mounting requirements | Special panel or installation conditions |
| M22-XX | Pushbutton / Indicator Head | Assembles with LED element to form complete unit | Full signal indication assembly |
| Bornier | Screw Terminal | Wire connection | 0.25–1mm² flexible wire (with ferrule); 0.75–1.5mm² solid wire |
- Cross-Brand Equivalent Replacement
| Marque | Modèle de remplacement | Similar Features | Différences |
| Schneider | XB2BVM3LC | 22.5mm mounting, DIRIGÉ, base type | Different terminal type; some versions with spring terminals |
| Siemens | 3SU1801-0AB60-0AA0 | 22mm mounting, DIRIGÉ, 12–30V AC/DC | Minor dimension & mounting difference |
| ABB | CL2-503G | 22mm mounting, DIRIGÉ, base type | Different color options and voltage range |
| Eaton Internal Replacement | M22-CLED Series | Same series, DIRIGÉ, base mounting | Cage clamp terminals, tool-free wiring |
| Eaton Internal Replacement | M22-LED Series | Same series, DIRIGÉ | Front mounting design for different panel layouts |
- Lignes directrices de sélection & Solutions de remplacement
5.1 Paramètres de sélection clés
| Paramètre | Points clés de la sélection | Recommended Specification |
| Correspondance de tension | Must match control system voltage | 12–30V AC/DC (common control circuit); 85–264V AC (direct mains supply) |
| Type de montage | LEDC base mounting for rear maintenance; LED front mounting for easy front installation | Base mounting recommended inside cabinet; front mounting for external panel |
| Type de borne | Screw terminals for low-vibration environments; cage clamp (CLED) for frequent rewiring | Cage clamp terminals preferred for industrial vibration sites |
| Color Selection | Industry standard: Rouge(Alarm/Stop), Vert(Running/Normal), Bleu(Standby/Ready), Blanc(General Indication) | Select according to equipment signal logic |
| Protection contre la pénétration | IP66/IP69K required for outdoor / dusty sites | Minimum IP65 recommended for industrial use |
5.2 Recommandations de remplacement
Voltage mismatch: Select model with corresponding voltage suffix (par exemple. M22-LEDC230-R for 230V AC)
Terminal type change: Replace with M22-CLED series (cage clamp), tool-free wiring, higher efficiency
Mounting type adjustment: Replace with M22-LED series (front mounting) for limited panel space
Higher brightness required: Adopt M22-FLED-HP high-power LED series, brightness increased by over 30%
5.3 Application Precautions
- Ensure 22.5mm panel cutout accuracy during installation to avoid degradation of protection rating.
- Pay attention to polarity when wiring (some LED models are polarity-sensitive).
- Avoid long-term operation above 70°C to extend LED service life.
- Regularly check terminal tightening to prevent loosening caused by vibration.
- Conforme à la CEI 60947-5-1: only for control circuit signal indication; not allowed for direct main circuit load control.
- Scénarios d'application typiques
Status indication for industrial automated production lines
Signal display of electrical control cabinets
Opération / fault alarm for mechanical equipment
Status monitoring of safety systems
Signal feedback of process control systems
Application Scenarios of M22-LEDC-IEC-EN60947-5-1
Définition: Eaton M22 series 22.5mm base-type LED indicator core, compliant with EN/IEC 60947-5-1 control circuit equipment standard.
Only used for control loop signal indication; not for main circuit load control. Fits standard 22.5mm cutout of industrial control cabinets and equipment panels.
- Main Application Scenarios
1.1 Electrical Control Cabinet / PLC Cabinet
Power-on ready, operation standby, fault alarm and emergency stop indication inside cabinet
PLC module communication, remote/local mode, auto/manual gear status lights
Panel indication for inverter, soft starter running, overload and fault signals
1.2 Industrial Automated Production Lines
Workstation standby, running, completion and material shortage alarm
Robot home position ready, action executing and fault shutdown indication
Conveyor start/stop, material jam, deviation and overload status signals
1.3 OEM Mechanical Equipment
Machines-outils, machines de moulage par injection, machines d'emballage, machines à imprimer, compresseurs d'air, les fans & pompes à eau:
Equipment power-on, standby, running, lubrication fault, over temperature and overload alarm
Safety door open/close, protection interlock status, hydraulic/pneumatic pressure indication
1.4 CVC / Approvisionnement en eau & Drainage / Building Electromechanical
Central air conditioning unit, cooling tower, water pump start/stop, fault and overload indication
Fire smoke exhaust fan, spray pump, pressure maintaining pump running/fault panel signal
Status indicator lights for basement distribution rooms and machine room power cabinets
1.5 Levage & Logistics Equipment
Overhead cranes, gantry cranes, ascenseurs, automated warehouses, forklift electric control panels:
Lift limit reaching, limit trigger, overload alarm and travelling operation status
Safety circuit on/off, emergency stop reset and mechanism ready indication
1.6 Nouvelle énergie & Industrial Control Supporting
PV inverter cabinet, wind power control cabinet, energy storage distribution cabinet:
Grid-connection ready, inverter running, islanding protection and fault alarm
AC/DC live circuit and communication normal status indication
1.7 Protection de l'environnement & Water Treatment
Sewage plant, water purification station, dosing system, grille machine, aeration equipment:
Equipment start/stop, tank liquid level high/low, pump & valve on/off, instrument fault indication
1.8 Operation Console / Sécurité & Contrôle industriel
Status lights matched with central control console buttons, access control cabinet status indication
Mode switching, interlock activation and alarm prompt for workshop remote console
- Suitable Working Conditions
Intérieur & outdoor industrial dusty and slightly humid workshops (IP66 protected)
Slightly vibrating equipment panels and vehicle-mounted industrial control cabinets
Wide operating temperature: -30°C ~ +70°C
Power supply scenarios: 12–30V AC/DC, 220V AC conventional control loops
- Specification Restrictions (per EN60947-5-1)
- For signal indication only; strictly prohibited to directly drive high-power loads such as contactors and heaters.
- Limited to control circuits and auxiliary loops only; not permitted for main power circuit switching.
- Must be assembled with M22 series indicator head and mounting base; cannot be installed on panel alone.
Eaton Moeller LED Indicator Light Series Model List
- Classement des séries & Naming Rule
1.1 Main Product Series
| Série | Mounting Cutout | Fonctionnalités principales | Application |
| M22 Series | 22.5mm standard cutout | RMQ-Titan modular design, IP66/IP69K | Mainstream for industrial control cabinets & equipment panels |
| M30 Series | 30mm standard cutout | Larger size, high brightness, multiple mounting methods | Outdoor equipment & long-distance observation |
| A22 Series | 22.3mm standard cutout | Economy type, chrome bezel, IP65 | Contrôle industriel général, non-harsh environment |
| C22 Series | 22.3mm standard cutout | Conception compacte, gain de place | Petit matériel & embedded installation |
Element Type: LEDC(Base mount, screw terminal), CLED(Base mount, cage clamp), DIRIGÉ(Front mount), LCLED(Integrated LED)
Couleur: R.(Rouge), G(Vert), B(Bleu), Oui(Jaune), W(Blanc), UN(Amber)
Tension: No suffix=12–30V AC/DC; 230=85–264V AC; 110=90–130V AC; 24=24V DC
Caractéristique spéciale: BVP(Blister pack), HP(High Power High Brightness), DUAL(Dual Color)
- M22 Series LED Element Models (Core Modules)
2.1 M22-LEDC Series (Base Mount, Screw Terminal)
| Modèle | Couleur | Tension nominale | Numéro de pièce. | Remarques |
| M22-LEDC-R | Rouge | 12–30V AC/DC | 216561 | Compliant with IEC/EN 60947-5-1 |
| M22-LEDC-G | Vert | 12–30V AC/DC | 216560 | Base fixed, screw terminal |
| M22-LEDC-B | Bleu | 12–30V AC/DC | 216559 | Power consumption approx. 0.3W |
| M22-LEDC-Y | Jaune | 12–30V AC/DC | 216558 | Operating temp -30°C~+70°C |
| M22-LEDC-W | Blanc | 12–30V AC/DC | 216557 | IP66/IP69K |
| M22-LEDC230-R | Rouge | 85–264V AC | 216565 | Conception à large tension |
| M22-LEDC230-G | Vert | 85–264V AC | 216564 | Suitable for industrial mains |
| M22-LEDC230-B | Bleu | 85–264V AC | 216563 | 50/60Hz compatible |
| M22-LEDC230-Y | Jaune | 85–264V AC | 216562 | Rated current 8–15mA |
| M22-LEDC230-W | Blanc | 85–264V AC | 216563 | Insulation voltage 250V |
2.2 M22-CLED Series (Base Mount, Cage Clamp Terminal)
| Modèle | Couleur | Tension nominale | Numéro de pièce. | Remarques |
| M22-CLED-R | Rouge | 12–30V AC/DC | Y7-218060 | Tool-free fast wiring |
| M22-CLED-G | Vert | 12–30V AC/DC | Y7-218061 | Vibration-resistant clamp connection |
| M22-CLED-B | Bleu | 12–30V AC/DC | Y7-218062 | Fits 0.25–1mm² flexible wire |
| M22-CLED-Y | Jaune | 12–30V AC/DC | Y7-218063 | Fits 0.75–1.5mm² solid wire |
| M22-CLED-W | Blanc | 12–30V AC/DC | Y7-218064 | IP66 |
| M22-CLED230-R | Rouge | 85–264V AC | Y7-218065 | Wide voltage |
| M22-CLED230-G | Vert | 85–264V AC | Y7-218066 | Rated current 8–15mA |
2.3 M22-LED Series (Front Mount)
| Modèle | Couleur | Tension nominale | Numéro de pièce. | Remarques |
| M22-LED-R | Rouge | 12–30V AC/DC | 216553 | Front fixed, easy front maintenance |
| M22-LED-G | Vert | 12–30V AC/DC | 216552 | Space-saving for narrow panels |
| M22-LED-B | Bleu | 12–30V AC/DC | 216551 | Dimension 38×37×10mm |
| M22-LED-Y | Jaune | 12–30V AC/DC | 216550 | Weight approx. 0.011kilos |
| M22-LED-W | Blanc | 12–30V AC/DC | 216549 | IP66/IP69K |
| M22-LED230-R | Rouge | 85–264V AC | 216557 | Wide voltage |
| M22-LED230-W | Blanc | 85–264V AC | 216563 | Industrial mains compatible |
- Complete M22 Indicator Models (With Operating Head)
3.1 Flush Type Complete Indicators
| Modèle | Couleur | Tension | Head Type | Numéro de pièce. | Remarques |
| M22-L-R | Rouge | 12–30V AC/DC | Flush | 216772 | Complete indicator with LED element |
| M22-L-G | Vert | 12–30V AC/DC | Flush | 216773 | IP66 |
| M22-L-B | Bleu | 12–30V AC/DC | Flush | 216775 | 22.5mm mounting diameter |
| M22-L-Y | Jaune | 12–30V AC/DC | Flush | 216774 | Modular structure |
| M22-L-W | Blanc | 12–30V AC/DC | Flush | 216776 | Lifespan 100,000 heures |
| M22-L-R-LED230 | Rouge | 85–264V AC | Flush | 132600 | Wide voltage |
| M22-L-G-LED230 | Vert | 85–264V AC | Flush | 132602 | BVP blister package |
| M22-L-B-LED230-BVP | Bleu | 85–264V AC | Flush | 132611 | Retail packaging |
3.2 Extended Convex Type Complete Indicators
| Modèle | Couleur | Tension | Head Type | Numéro de pièce. | Remarques |
| M22-LCH-R | Rouge | 12–30V AC/DC | Convex Taper | 216777 | Good long-distance visibility |
| M22-LCH-G | Vert | 12–30V AC/DC | Convex Taper | 216778 | IP66 |
| M22-LCH-B | Bleu | 12–30V AC/DC | Convex Taper | 216779 | 22.5mm mounting diameter |
| M22-LCH-Y | Jaune | 12–30V AC/DC | Convex Taper | 216781 | Conception modulaire |
| M22-LCH-W | Blanc | 12–30V AC/DC | Convex Taper | 216914 | Compatible with multiple light sources |
- Special Function LED Indicators
4.1 Double / Multi-Color LED Indicators
| Modèle | Color Combination | Tension | Type de montage | Numéro de pièce. | Remarques |
| M22-LED-DUAL-RG | Rouge/Vert | 12–30V AC/DC | Front mount | 180800 | Independent control for two colors |
| M22-LEDC-DUAL-BY | Blue/Yellow | 12–30V AC/DC | Base mount | 180801 | Screw terminal connection |
| M22-CLED-DUAL-RW | Red/White | 12–30V AC/DC | Base mount | 180802 | Cage clamp terminal |
| M22-L-DUAL-RG | Rouge/Vert | 12–30V AC/DC | Flush complete unit | 180803 | Full assembly with head |
4.2 High Power (HP) LED Indicators
| Modèle | Couleur | Tension | Type de montage | Numéro de pièce. | Remarques |
| M22-LEDC-HP-R | Rouge | 12–30V AC/DC | Base mount | 216570 | Brightness increased over 30% |
| M22-CLED-HP-G | Vert | 12–30V AC/DC | Base mount | 216571 | Ideal for long-distance viewing |
| M22-LED-HP-B | Bleu | 85–264V AC | Front mount | 216572 | Conception à large tension |
- M30 Series LED Indicator Models
| Modèle | Couleur | Tension | Type de montage | Numéro de pièce. | Remarques |
| M30-L-R | Rouge | 12–30V AC/DC | Flush | 183282 | 30mm mounting diameter |
| M30-L-G | Vert | 12–30V AC/DC | Flush | 183283 | IP66 |
| M30-L-B | Bleu | 85–264V AC | Flush | 183284 | Wide voltage |
| M30C-FL-Y | Jaune | 12–30V AC/DC | Flush, metal bezel | 183285 | Enhanced durability |
| M30-LEDC-R | Rouge | 12–30V AC/DC | Base mount | 216580 | Screw terminal connection |
- A22 Series LED Indicator Models
| Modèle | Couleur | Tension | Type de montage | Numéro de pièce. | Remarques |
| A22-LCLED24-R | Rouge | 24À DC | Intégré | 108186 | 22.3mm mounting diameter |
| A22-LCLED24-G | Vert | 24À DC | Intégré | 108187 | Economy type |
| A22-LCLED110-Y | Jaune | 90–130V AC | Intégré | 108194 | Chrome front bezel |
| A22-LCLED230-B | Bleu | 85–264V AC | Intégré | 108195 | Wide voltage |
| A22-LCLED380AC-W | Blanc | 380V et | Intégré | 108206 | Industrial high voltage applicable |
- Accessory Models
| Numéro de pièce. | Nom | Applicable Series | Fonction |
| M22-CK10 | LED Mounting Bracket | M22 | LED contact support & fixing |
| M22-K01 | Mounting Fitting | M22 | Reliable indicator installation |
| M22-A | Adapter | M22 | Special mounting adaptation |
| M22-LCH | Convex Taper Head | M22 | Improve long-distance visibility |
| M22-L | Flush Head | M22 | Montage sur panneau standard |
- Selection Quick Reference
| Requirement | Série recommandée | Key Parameter Selection |
| Standard industrial cabinet | M22-LEDC | 12–30V AC/DC, Rouge(Alarm), Vert(Running) |
| Frequent rewiring & entretien | M22-CLED | Cage clamp terminal, tool-free |
| Convenient front panel installation | M22-LED | Front mounting, gain de place |
| Long-distance observation | M22-LCH / M30-L | Convex head + high brightness LED |
| Wide voltage mains application | M22-LEDC230 | 85–264V AC, global mains compatible |
| Dual-color signal indication | M22-LED-DUAL | Red/Green or Blue/Yellow combined independent control |
