OMRON G3PA-220B-VD Solid State Relay - Contactor,circuit breaker,sensor,Encoder,PLC,Converter

Wechat: +86-13184948252  WhatsaApp: 0086-13811255435  E-mail:  kent@bestcontactor.com

About    Contact    |    

 OMRON G3PA-220B-VD Solid State Relay - Contactor,circuit breaker,sensor,Encoder,PLC,Converter

PLC/

 OMRON G3PA-220B-VD Solid State Relay

Status: EOL Discontinued (since 2017); Direct replacement: G3PA-220B-VD-X Type: Single-hase SSR, integrated heat sink, zero-cross triggering, opto-coupler isolation; the mainstream model for temperature control & heating loads ✅ Model Number Breakdown G3PA: G3PA series power solid state relay 220: 20A rating, AC24~240V B: Built-in heat sink VD: DC control input (DC5~24V) 📌 Core Electrical Specifications ...

  • Product Details

Status: EOL Discontinued (since 2017); Direct replacement: G3PA-220B-VD-X

Type: Single-hase SSR, integrated heat sink, zero-cross triggering, opto-coupler isolation; the mainstream model for temperature control & heating loads

✅ Model Number Breakdown

G3PA: G3PA series power solid state relay

220: 20A rating, AC24~240V

B: Built-in heat sink

VD: DC control input (DC5~24V)

📌 Core Electrical Specifications

Input (Control Side)

Rated input voltage: DC 5~24V

Operating voltage range: DC 4~30V

Input current: ≤7mA @ 25℃

Must-operate voltage: ≤DC4V

Must-release voltage: ≥DC1V

Polarity: DC positive & negative, no reverse connection allowed

Isolation: Opto-triac isolation; dielectric strength AC4000V / 1min (input ↔ output)

Output (Load Side)

Load voltage: AC24~240V (50/60Hz)

Operating voltage range: AC19~264V

Rated load current: 0.1~20A @ 40℃ (derating required above 40℃ ambient temperature)

Non-repetitive surge current: 220A (60Hz, 1 cycle)

Repetitive peak off-state voltage VDRM: 600V

On-state voltage drop: ≤1.8V RMS

Leakage current: ≤5mA@AC100V; ≤10mA@AC200V

Trigger mode: Zero-cross turn-on

Operate / release time: ≤½ AC cycle +1ms

I²t rating: 260 A²·s

🧱 Environmental & Mechanical Data

Operating temperature: -30℃ ~ +80℃ (no condensation)

Storage temperature: -30℃ ~ +100℃ (no icing or condensation)

Humidity: 45~85% RH

Mounting: DIN rail mounting or M4 screw fixing

Weight: approx. 340g

Certifications: UL508, cUL, EN60950-1

🛠️ Typical Applications

  1. Temperature & Heating Control (Primary Use)
  2. Plastic machinery: Barrel heater bands for injection moulding machines, extruders, PET blow moulders with PID cycle control via temperature controllers
  3. Food processing equipment: Industrial ovens, drying lines, heat sealers, furnaces, constant-temperature water/oil baths
  4. Packaging machinery: Heat sealers, hot foil stamping machines, thermoforming equipment

Advantage: Zero-cross switching suppresses current surges and extends heater life; directly driven by PLC or temperature controller outputs

  1. HVAC & Environmental Equipment

Duct electric heaters, dehumidifier heating modules, auxiliary heating for thermostatic air conditioners, thermal cycling test chambers

Small fans & circulating water pumps (resistive / lightly inductive loads; NOT suitable for direct start-up of heavy-duty motors)

  1. Automation Production & Packaging Lines

AC solenoid valves, thermo-pneumatic actuators, small 220V transformers, indicator light banks

Conveyor auxiliary heating, labeler heating modules

Feature: Non-contact switching with no arcing; preferred for control cabinets with dust and low explosion risk

  1. Lighting & Building Automation (Resistive Lamp Loads)

Industrial lighting circuits, lamp ageing racks, infrared heating lamps (incandescent lamps only)

⚠️ Note: LED & fluorescent lamps suffer leakage current causing faint glow; install bleeder resistors in parallel.

  1. Burn-in & Test Equipment

Power ageing racks, load test benches, component high-temperature ageing boards with independent on/off control for multi-channel AC loads

Low-noise power switching for laboratory instruments without spark interference

✅ Application Limits & Selection Notes

Recommended loads: Resistive heating loads first; frequent switching (several times per second max); driven by DC24V PLC outputs; DIN rail cabinet installation

NOT suitable for: High-frequency PWM voltage regulation, direct starting of large motors, heavy inductive loads (large inductors, contactor coils), capacitive loads

Important note: This model is discontinued; new projects adopt G3PA-220B-VD-X, fully pin-to-pin and electrically compatible for direct replacement

⚠️ Troubleshooting Guide

  1. Output permanently ON: Thyristor breakdown caused by short-circuit load surge
  2. No switching action: Insufficient input voltage, insufficient PLC output current, reversed DC polarity
  3. Intermittent switching: Overheating due to poor heat dissipation, loose terminals, current exceeding derating curve
  4. Lamp faint glow from leakage current: Add parallel bleeder resistors for lamp loads

🔁 Replacement Options

  1. Original direct replacement: G3PA-220B-VD-X (same pinout & specs, current production)
  2. Higher current within the same series: G3PA-240B-VD (40A), G3PA-260B-VD (60A)
  3. Domestic alternative: Zero-cross SSR 20A/AC240V from Ximaden / Yangming

📎 Terminal Definition (4 terminals total)

+,-: DC control input (polarized)

L, OUT : AC load circuit (phase sequence does not matter for zero-cross type)

Complete Model List of OMRON Solid State Relays (SSR)

Suffix explanation: VD = DC control; VA = AC control; -X = new version replacing discontinued old models; B = integrated heat sink; G3PA is your target series

  1. G3PA Series-Integrated Heat Sink Single-Phase SSR (Heating, DIN Rail Mount)

Old EOL models: G3PA-210B-VD / G3PA-220B-VD / G3PA-240B-VD / G3PA-260B-VD / G3PA-420B-VD

New pin-compatible replacements with suffix -X

G3PA-210B-VD-X|AC24~240V, 10A, DC5~24V control

G3PA-220B-VD-X|AC24~240V, 20A, DC5~24V control (direct replacement for G3PA-220B-VD)

G3PA-240B-VD|AC24~240V, 40A, DC5~24V control

G3PA-260B-VD|AC24~240V, 60A, DC5~24V control

G3PA-420B-VD / -2|AC200~480V, 20A, DC12~24V

G3PA-430B-VD / -2|AC200~480V, 30A, DC12~24V

G3PA-450B-VD-2|AC200~480V, 50A, DC12~24V

Interchangeable power cartridges: G32A-A10/-A20/-A40/-A60/-A420

  1. G3PE Series-Compact Slim Heat Sink SSR (Single & Three-Phase Heaters)

Single-phase:

G3PE-215B / 225B / 235B / 245B (15/25/35/45A, AC240V, zero-cross / random options)

Three-phase solid-state contactors:

G3PE-515B / 525B / 535B / 545B (3-phase 380V heating loads)

  1. G3PJ Series-Low Heat SSR for Dense Cabinet Installation

G3PJ-225B-VD, G3PJ-225B-VD-PU (Push-in spring terminals), 25A single-phase

  1. G3PF Series-Intelligent SSR with Built-in CT (Heater Burnout & SSR Short-Circuit Detection)

Single-phase: G3PF-225B / 235B / 245B

Three-phase: G3PF-525B / 535B / 545B

  1. G3PC Series-Fault Detection SSR with Alarm Output

For safety monitoring in temperature control loops with fault signal output

  1. G3PH Series-High-Current High-Power SSR

G3PH-275B: AC240V, 75A

G3PH-475B / 4150B: AC480V, 75A / 150A

  1. G3NA Series-Puck-Style SSR (No Built-in Heat Sink; External Heat Sink Required)

5~90A bare power core, cost-effective with separate heat sink

G3NA-205B, 210B, 220B, 240B, 260B, 420B, 440B, 460B, 490B

  1. G3NE Series-Low-Cost Compact SSR (Built-in Equipment, 5~20A)

G3NE-210T, 220T, 210SL, 220SL; small size for cabinet internal mounting

  1. G3F / G3FD Series-Plug-in Socket SSR (MY Relay Footprint)

G3F-203SN, G3FD-102SN; DIN socket pluggable, small-power IO & solenoid valves

  1. G3H / G3HD Series-High-Current Plug-in SSR (LY Relay Footprint)

G3H-205B, G3H-210B; socket installation

  1. G3R-I/O Series-Isolated Interface SSR (High Insulation for PLC Signal Isolation)

Ultra-thin IO isolation SSR for PLC signal separation

  1. G3RV Series-6mm Ultra-Slim DIN Rail SSR (G2RV Relay Form Factor)

G3RV-SR, G3RV-ST; high-density control cabinets

  1. PCB-Mount Miniature SSR (Low Current)

G3MC: Ultra-small PCB SSR, 1A / 2A

G3TB: PCB-mounted SSR with status indicator

  1. G3PW Series-Single-Phase Power Controller (Not Standard SSR; Phase-Angle Regulation)

Thyristor power regulator for continuous voltage adjustment, not simple on/off zero-cross switching

Suffix Code Legend (Quick Selection Guide)

VD: DC5~24V DC input

VA: AC100~240V AC input

B: Integrated heat sink

-X: New production version replacing discontinued old models

-2: 480V high-voltage variant

PU: Push-in spring terminals

SL/SN: Input circuit variations

Prefix 2: AC240V single-phase; Prefix 4/5: AC400/480V (single / three-phase)

Quick Selection Cheat Sheet

Standard heating, DIN rail, 20A → G3PA-220B-VD-X (replaces old G3PA-220B-VD)

Heater burnout monitoring required → G3PF

Three-phase heating → G3PE three-phase / G3PF three-phase

Current above 75A → G3PH

Cost-saving with external heat sink → G3NA

Plug-and-play replacement for mechanical relays → G3F / G3H

Prev:

Leave a Reply

Leave a message