Lenze E82EV552K4C Inverter

E82EV552K4C is a 5.5kW three-phase inverter of Lenze 8200 Vector series. It accepts 380-480VAC input, delivers 13A output with IP20 protection grade. Built-in vector control and brake transistor, suitable for general industrial speed regulation applications.

1. Definición del código del modelo

Número de orden: E82EV552K4C (Modelo estándar); E82EV552K4C200 (Extended Version)

2. Especificaciones técnicas principales

3. Full E82EV Series Model List

3-phase 400V Series (Suffix K4C)

3-phase 230V Series (Suffix K2C)

Extended Models (Sufijo 200)

All standard models support 200 sufijo, p.ej. E82EV552K4C200

Enhanced C1-class EMC filter

Extended working temperature: -10℃ ~ +60℃

24-month warranty period

4. Cross-brand Replacement Comparison

5. Fallos comunes & Soluciones

6. Air Shipment Compliance & Certificaciones

Air Transport Assessment

Lithium Battery: Built-in electrolytic capacitor, no lithium battery, UN38.3 test exempted

Classification: Ordinary electrical equipment, non-dangerous goods

Embalaje: Anti-static package, fixed firmly against collision

Documents: Commercial invoice, packing list, CE certificate

Certification List

Shipment Instructions

1. Disconnect all external connections before delivery
2. Fix inside rigid container with cushion materials
3. Avoid inversion and violent vibration
4. Attach copies of certification documents
5. Application Cases & Adaptación de la industria

Aplicaciones típicas

Material Conveying: Speed control for belt and chain conveyors, encima 30% ahorro de energía

Admirador & Bomba de agua: Constant pressure/flow PID control for central air conditioning and cooling towers

Máquinas herramienta: Spindle drive, stepless speed regulation and fast start-stop

Maquinaria de embalaje: Food and printing equipment, precise synchronous operation

Agitator Equipment: Chemical reactor stirring for variable viscosity materials

Adaptación de la industria

Practical Case

An auto parts factory adopts E82EV552K4C for stamping line conveyor:

Speed control accuracy improved to ±0.1m/min

Energy consumption reduced by 28%, annual power saving about 120,000 RMB

Equipment failure rate decreased by 40%, costos de mantenimiento reducidos 35%

8. Directrices de selección

Quick Rules

1. Código de energía: 55=5.5kW, 75=7.5kW, 11=11kW
2. Voltage Identification: K4=400V, K2=230V
3. Size Identification: 2=100mm width, 3=140mm width
4. Función principal: EV=Vector control, K=EMC filter, C=Standard control
5. Application Environment Requirements

Suitable Conditions

Installed inside industrial automation control cabinets

Temperatura ambiente: -10℃ ~ +40℃, dry, dust-free and non-corrosive air

Stable power grid with voltage fluctuation ≤±10%

Scenarios requiring precise speed and torque adjustment

Unsuitable Conditions

Outdoor or humid locations (insufficient IP20 protection)

Heavy dust and corrosive gas environment

Severe grid fluctuation over ±15% without stabilizer

Heavy load frequent forward/reverse operation without brake resistor

Installation Precautions for Lenze E82EV552K4C

1. Cabinet Installation Space
2. Vertical wall mounting only; horizontal, side or upside-down installation forbidden
3. Reserve ≥100mm vertical clearance, ≥30mm lateral clearance for heat dissipation
4. Minimum 50mm spacing between multiple inverters to avoid heat interference
5. Mantener alejado de fuentes de calor, air outlets and direct sunlight
6. Environmental Limits

Temperatura de funcionamiento: -10℃ ~ +55 ℃, derate load above 40℃

Sin condensación, polvo, corrosive or flammable gas

Keep distance from high-power electromagnetic devices, contactors and motors

Derate operation when altitude exceeds 1000m

3. Especificaciones de cableado

Cableado del circuito principal

1. Do not reverse incoming L1/L2/L3 and outgoing U/V/W terminals
2. Separate power cables and control cables with ≥20cm gap, no same conduit laying
3. Reliable earthing, resistencia de puesta a tierra ≤4Ω, ground wire diameter no less than half of phase wire
4. Fasten terminals with proper torque to prevent loose connection and overheating

Cableado del circuito de control

1. Use shielded twisted pair for analog and communication cables, single-end shielding grounding
2. Avoid routing signal cables close to power lines
3. Prevent polarity reversal of external 24V power supply
4. Disipación de calor & Ventilation
5. Keep cabinet door ventilated, clean filter screen regularly
6. Equip cooling fan for smooth air circulation
7. Avoid direct sunlight on the device
8. CEM & Anti-interference Protection
9. Built-in EMC filter works only with complete grounding
10. Motor cable length recommended ≤50m; install output reactor for long cables
11. Do not coil or twist input and output wires
12. Freewheel diodes parallel connected to peripheral relays and solenoid valves
13. Brake Accessory Installation

Built-in brake transistor matched with external brake resistor

1. Use 75Ω/500W resistor, mount in well-ventilated area
2. Short resistor wiring, firm connection and thermal isolation protection
3. Inspección previa al encendido
4. Confirm 3-phase 380-480V input without phase loss
5. Check no inter-phase or earth short circuit, correct and tight wiring
6. Pass motor insulation test; perform no-load trial run first
7. Mechanical Fixation
8. Tighten four mounting screws evenly to avoid shake
9. Flat mounting surface to prevent housing deformation
10. Safety Regulations
11. Wait 5 minutes after power off for DC bus discharge before disassembly
12. Do not open cover or touch terminals during operation
13. Forbid short-circuit protection terminals or disable fault protection functions